Austin Cryogenics Co.

Cryopump Repair Parts

2008-03-29T13:37:00.000-07:00

Austin Cryogenics Company

http://www.austincryogenics.com/

sales@austincryogenics.com

All Major Credit Cards Accepted

View Helpful Cryopump Repair Videos
Here

15K Cryo-Adsorbing Array Kits

$396.00 USD

(Click image for price)

Click Image Above For Video

15K Charcoal Arrays
for other cryopump manufacturers can be refurbished upon request!

********************************************************************************

Standard Complete Repair Kits (Helium Side)

$390.00 USD
(Click image for price)

P/N: 100151 (8/8F)

P/N: 100152 (10)
P/N: 100153 (400/500)

Cryopump Indium Gasket Kits

Description 99.99% Pure Indium P/N Price

Indium Gasket Set, Precut, CT-8 Cryopump IN-CT8 $50.00

Indium Gasket Set, Precut, CT-8 On-Board* Cryopump IN-CT8OB $50.00

Indium Gasket Set, Precut, CT-8F Cryopump IN-CT8F $50.00

Indium Gasket Set, Precut, CT-8F On-Board* Cryopump IN-CT8FOB $100.00

Indium Gasket Set, Precut, CT-10 Cryopump
IN-CT10
$100.00

Indium Gasket Set, Precut, CT-10 On-Board* Cryopump
IN-CT10OB
$100.00

Indium Sheet, 3"x5" x .005" IN-3x5 $40.00
CT-400 Indium Gasket Sets $100.00

Custom Indium Gaskets can be designed and manufactured with short lead times

*****************************************************************
CRYOPUMP 15K ARRAY

Links

Cryopump Compressor Installation Tool Kit

2008-03-28T09:56:00.000-07:00

The Cryopump, and Compressor are connected together within a closed helium gas circuit. The helium gas is pressurized at the compressor, and is linked to the cryopump with gas supply, and return, S.S. flex hoses. Located at each one of the disconnect points along the gas circuit are self-sealing couplings. These couplings are designed to be disconnected, and reconnected without loosing any of the pressurized gas within the system.
Special wrenches are maufactured to work easily with these fittings. The different sizes are available in a tool kit.

Click Here To Review Gas Depressurization Procedure For Cryopump

Installation Tool Kit
P/N: 100325
$135.00

Item	Part Number	Description	Qty
1	100113	Depressurization Fitting, 1/2" Female	1
2	400080	1" Wrench, Self-Sealing Fittings & Couplings	1
3	400081	1-1/8" Wrench, Self-Sealing Fittings & Couplings	1
4	400082	1-3/16" Wrench, Self-Sealing Fittings & Couplings	1

Cryopump Wrench Set
P/N: 100412
$75.00
Includes Sizes
1.00 Inch
1-1/8 Inch
1-3/16 Inch

Cryopump Motor Exchange

2008-03-27T14:06:00.000-07:00

The Cryopump Drive Motor is the heart of your cryopump system. The location of the motor was designed and manufactured to last the life of your cryo. It was purposely located in the downside of the helium gas circuit.
The helium gas passes through the internal components of the motor after being compressed in the coldhead regenerator where it produces the extremely low temperatures required for your cryopump to freeze the gasses in your chamber, or other enclosure to create a vacuum. As the helium passes through the motor, it helps to keep the hard working motor cool, but it also can deposit any contaminants, like oil or water, into your motor windings, and the motor bearings as well. Routine maintenance of your cryopump is instrumental in keeping any contaminants out of your system, and help to keep your cryopump up and running for an extended period of time. If your motor bearings were replaced with off-the-shelf bearings that were not cleaned, and repacked with special grease, your motor bearings will fail, crashing the motor, shutting down the cryo, and then stopping your process.
The high-pressure helium gas can literally dry out, or evaporate improper grease, and contaminate the rest of your helium circuit.

The cryopump motor can also be the single most expensive piece of your cryopump to replace. You now have an alternative to replacing expensive faulty motors by participating in our motor exchange program.

If your motor is showing signs of failure, or has completely stopped during operation, you can send it in to us for a replacement motor that can simply replace the failed unit. This program was developed to keep your operating cost to a minimum. Call ahead and have your replacement motor on its way, before you have to stop your system, and to keep your down time to a minimum. Each motor comes with a warranty, new hardware, and the special O-Ring seals required to perform the replacement. Return your old motor for repair and credit.

2007-06-16T19:10:00.000-07:00

Know exactly what your helium line pressure is between your cryopumps and your compressor.

Price: $100.00

CTI Cryopump Temp Monitor

2007-06-11T12:10:00.000-07:00

Cryopump Temperature Monitors

CTI Temperature Indicator

Complete with 20 ft. cables. Tested and ready to use.

6 Mo. Warranty

Price: $450.00

The CTI-TEMPERATURE INDICATOR is used to monitor cryopump operating temperatures
range 10K to 320K Kelvin. There are two set points that are adjustable over this
range. When the vacuum pump temperature reaches either the LOW or HIGH set point,
electrical dry contacts on the rear panel can be used to activate indicators or
to operate solenoid valves for controlling temperature related functions.
******************************************************************************

Lakeshore Cryopump Monitors, Model 818

Calibrated for CTI Cryopumps

Manual, Power Cable, 20 ft Diode Cable, 6 Mo. Warranty

P/N: 100304 $650.00

Specials:

Oxford/Austin Scientific Model 310 Cryopump Temperature Monitors

For CTI Diode Style Cryopumps!

NEW With 12 Mo. Warranty!

$400.00

Service and repairs on all models of Temperature Monitors, Controllers, Interface units and OnBoard Modules.

Silicon Diode Temperature Sensor

P/N: 100195

Price: $300.00

Cryopump Scotch Yoke Bushings

2007-05-23T11:55:00.000-07:00

When you look into the sight glass of your cryopump, and notice a black powder residue coating the window, the bearings and other internal parts?

Bad news: Your pump may have been installed with graphite scotch yoke bushings.

Good news: You can now replace those old bushings with a new material developed by DuPont specifically designed for this application. Lightweight, durable, low wear and low friction, bushing material.

Upper and Lower Bushings come with a standard Cryopump Repair Kit for all models.
Or you can purchase the bushings separately.

Scotch Yoke Bushings
P/N: 300016
P/N: 300017
Price: $25.00/Ea.
Qty discounts avail.

CT-100 ISO Cryopump

2007-05-23T11:08:00.000-07:00

CT-100
ISO Inlet Flange
P/N: 8103031
Price, AS-IS: $1100.00
Condition: Very Clean--Removed from spares for working tool.
Avail: In Stock as of 5/20/2008 (New Listing)
A real workhorse that CTI does not provide anymore.
The last one with an ISO flange we have in stock.

Cryopump Parts Exchange Program

2007-05-22T22:12:00.000-07:00

The ACC Exchange Program was implemented in order to make unique, or standard parts available for all customers. It has proven to be a continuing effort by us to supply parts to customers that are conscious of the ever-rising cost of new parts. Customers who have asked us to supply these parts that need to remain on budget for rising cost of standard repairs.

At ACC, we have answered the requirements that our customers were asking for.
The ACC Exchange Program is designed for customers that want to have replacement parts available in a timely manner, and meet all the original OEM specifications. Where customers are able to send in to us the used units, in exchange for reconditioned parts. These parts are fully reconditioned to meet the OEM factory specifications.
The program is quite simple. When you order a part it will be shipped to your facility. Once you have replaced the used unit with the item you ordered, simply put the used item in the same box that it was delivered in, and send it back to us for reconditioning.
Our existing partners refer to this as the GREEN recycling program

EXCHANGE PROGRAM

____________________________________________________________________

Manuals

2007-05-22T22:02:00.000-07:00

Do you need a copy of your compressor or cryopump manual?
Email us to see if we have a pdf copy for you.

Adsorber Replacement Intervals

2007-05-22T21:18:00.000-07:00

Adsorber replacement is one of the easiest and most important routine maintenance jobs you can perform on your system!

Recommended Replacement Intervals

Manufacturer-Model-----Interval

CTI-Cryogenics- 9600--- 3 Years
CTI-Cryogenics- 8500/8510---3 Years
CTI-Cryogenics- 8200---1 Year
CTI-Cryogenics - 8300---1 Year
CTI-Cryogenics- 1020---1 Year
CTI-Cryogenics- SC---1 Year
CTI-Cryogenics- MC---1 Year
Air Products - 1L02W/1R02W---1 Year
Varian - 202---1 Year
Varian (Ebara)-313/323/2.1---1 Year
Leybold - Cool-Pak---1 Year
Leybold - Rw3/RA3---2 Years
Leybold - RW4000/6000---2 Years
Austin Scientific- 125W---1 Year
Austin Scientific- 450---3 Years
Sumitomo- Refer to manual
Balzer- Refer to manual

ADSORBER PRICES

Description 99.99% Pure Indium	P/N	Price
Indium Gasket Set, Precut, CT-8 Cryopump	IN-CT8	$50.00
Indium Gasket Set, Precut, CT-8 On-Board* Cryopump	IN-CT8OB	$50.00
Indium Gasket Set, Precut, CT-8F Cryopump	IN-CT8F	$50.00
Indium Gasket Set, Precut, CT-8F On-Board* Cryopump	IN-CT8FOB	$100.00
Indium Gasket Set, Precut, CT-10 Cryopump	IN-CT10	$100.00