Cryopump Temp Monitors

NEW DESIGN ACC CRYOPUMP TEMPERATURE MONITORS

Cryopump Monitor Model features
1.} Meters reads 10 to 320 degree kelvin
2.} Input power range is 100-240 VOLTS AC at 47-63Hz.
3.} LED meter display is three digits 0.8 inch high for easy reading from a distance or up close.
4.} LED meter display comes in your color choice of red, green or blue.
5.} Front panel is 3.00 X 4.00 inches. Chassis is 2.825 X 3.43 inches.
6.} For panel mount cut hole 2.87 inches high by 3.47 inches wide.
7.}You can order for panel mount or rubber feet for desk top use.
8.} you can select the diode cable length you want to order.
Cryopump Monitor Model 2 features
1.} Meters reads 10 to 320 degree kelvin
2.} Input power range is 100-240 VOLTS AC at 47-63Hz.
3.} LED meter display is three digits 0.8 inch high for easy reading from a distance or up close.
4.} LED meter display comes in your color choice of red, green or blue.
S.} Front panel is 3.00 X 4.00 inches. Chassis is 2.825 high X 3.43 inches wide X 5.025 inches long.
6.} For panel mount cut hole 2.87 inches high by 3.47 inches wide.
7.)You can order for panel mount or rubber feet for desk top use.
8.} you can select the diode cable length you want to order.
9.} Front panel switches set and display the low and high temperature set points while
the switch is pressed in.
10.} LED on the low and high temperature switches indicate set point reached.
11.} Low temperature set point can be adjusted from 11 to 99 degrees kelvin.
12.} High temperature set point can be adjusted from 112 to 308 degree kelvin.
B.} One amp Relay contacts for the low and high temperature set points may be use as interlocks
to control your system.

Cryopump Temperature Monitors

CTI Temperature Indicator
Complete with 20 ft. cables. Tested and ready to use.
6 Mo. Warranty
Price: $450.00

The CTI-TEMPERATURE INDICATOR is used to monitor cryopump operating temperatures
range 10K to 320K Kelvin. There are two set points that are adjustable over this
range. When the vacuum pump temperature reaches either the LOW or HIGH set point,
electrical dry contacts on the rear panel can be used to activate indicators or
to operate solenoid valves for controlling temperature related functions.
******************************************************************************

Lakeshore Cryopump Monitors, Model 818

Calibrated for CTI Cryopumps

Manual, Power Cable, 20 ft Diode Cable, 6 Mo. Warranty

P/N: 100304        

Specials:
Oxford/Austin Scientific Model 310 Cryopump Temperature Monitors
For CTI Diode Style Cryopumps!
NEW With 12 Mo. Warranty!
 
Service and repairs on all models of Temperature Monitors, Controllers, Interface units and OnBoard Modules.

_________________________________________________________________________________________

Cryopump Drive Cables
From Compressor To Cryopump

 P/N: 100159

On-Board* Compressor (10 Pin Male)

Cryo-torr* Pump (3 Pin Female)

 P/N: 100160 

Standard  Compressor (6 Pin Male)

Standard Cryo-torr* Pump (3 Pin Female)

 P/N: 100162  

On-Board* Compressor (10 Pin Male)

On-Board* Pump (10 Pin Female)

Order P/N	Description
100159-10	Drive Cable, On-Board Compressor to Cryotorr Cryopump, 10 ft.
100160-10	Drive Cable, Standard Cryotorr Pump and Compressor, 10 ft.
100162-10	Drive Cable, On-Board Compressor and On-Board Crypumps, 10 ft
100158-10	Diode Cable, Temperature Monitors to Cryopump
	Special Cables built to order. Submit drawings, sketches, samples, pics	RFQ

Cryopump Cables are available in custom lengths! Add $2.00/ft.

__________________________________________________________________________________________
Silicon Diode Temperature Sensor

Silicon Diode Temperature Sensor
Includes Diode Device, Wire Leads, Copper Mounting Block, Indium & Hardware
Calibrated for CTI style cryopumps

P/N: 100195

 

P/N: 100195

Silicon Diode Temperature Sensor Kit
Includes Diode Device, Wire Leads, Copper Mounting Block, Indium, Hardware, Flange & Connector
Calibrated for CTI style cryopumps

P/N: 100196